Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries





13:10. Back window regulator

GENERAL INFORMATION

1. Window regulator
2. Ram
3. Openings for fastening of secret rivets
4. Lock bracket
5. Window regulator tire
6. The lowered glass
7. Secret rivet of 4,8 mm

Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Carefully remove the pressurizing film.
Prevention

The film is easily torn.


3. Disconnect a lock bracket from the window regulator tire.
4. Extract the lowered glass with the tire of a window regulator from the ram down and move up in the window tire. Record glass a plastic or wooden wedge that it did not drop out.
5. Window regulator приклепан. Ream four rivets a drill of 4,8 mm. Track at the same time that the drill did not enter an internal tin of a door. For a rivet special pincers are necessary for secret rivets.
6. Take a window regulator from below. The power window is taken together with the engine. Disconnect a wire of the power window.

Installation

PERFORMANCE ORDER
1. Insert a window regulator into a door and a priklepayta pincers for secret rivets. If is not present at the disposal of pincers, the window regulator can be fixed by screws and nuts. Before a vvinchivaniye to grease screws with the protectant, for example, of Loctite 270 or Omnifit.
2. Carefully lower glass and establish a lock bracket.
3. Connect electric wires.
4. Attach the pressurizing film, having tracked that there were no folds.
Prevention

Do not damage a film – it has to be faultlessly tight.


5. Establish an internal covering of a door.